The device supports a variety of pixel protocols and is equipped with EtherCON and powerCON in and out and can be operated with a single power supply or in combination with two power supplies. The Maverick MK2 profile also converts TCP / IP to DMX with a short data cable run and provides RDM control over the face for remote access reports. A centralized output widget manages all third-party systems, including rttrpl, and art-net protocols.
The user can determine how the system behaves when a more sophisticated DMX source is connected and what to do if the primary DMX sources are lost. This is a handy feature for remote access and control of the Maverick MK2.
The light produced by the K-EYE is of very high quality, with CRI values that have never been achieved before by an LED. The first number defines the protection of dust and foreign bodies, the second number defines the protection of liquids, and the H tells us that the housing can serve as a high voltage device. C stands for protection against access tools, D for protection against access wires, B for protection of fingers, M for standstill of the device case, and S for movement during water testing. Typical Cri values are between 97% and 99%, H between 0.5% (low protection) and 100%.
IP protection
IP protection class is perfect for outdoor use as it is strong enough to protect against penetrating dust. IP55-rated housings are also suitable for mild marine environments, as they withstand pressurized water spraying and corrosion. Besides the good weather forecast, they are also strong in cold weather.
The mower also has an IP55 enclosure rating, meaning it should withstand adverse weather conditions, although iRobot suggests stowing it and the mower beacon in it during the harsh winter months.
To meet your application requirements, IP55 housings are available in a variety of special materials such as stainless steel, aluminum, copper, glass, and other materials. The custom enclosure features include mounting plates that can include drilling or tapping, steel powder-coated steel, or aluminum. Due to the high-quality materials and the corrosion and damage resistance, there is no need to protect your IP45 housing from vandalism.
If you want to use your IP55 housing in such a slightly hazardous environment, aluminum is the best choice. Normally arc flash cannot protect the housing, so the person must keep this in mind.
Useful for outdoor applications
This is suitable for outdoor applications, as its IP55 protection class protects you from high temperatures, high humidity, and low humidity. Enclosures that meet and protect IP55 can be rated and protected just as well as a standard glass enclosure, but with a slightly different design.
Cases with a liquid class of 1 are effective against dripping water in the upright position and protect against rain. This helps to divert the rain flow from the enclosure, while the rest is exposed to less rain, which protects it from it. However, bear in mind that these enclosures are not completely dust-proof — tight or waterproof and a very dusty underwater environment can be too hard. IP55 is not completely waterproof, but it protects against corrosive substances by spraying them heavily and immersing them.
This provides protection against electrical heat and sunlight, extends the life of the electrical components in the housing, and protects against corrosion and damage from water.
Final words
IP55 enclosure offers you superior products and services that help you achieve a competitive advantage with your enclosure. We are proud to offer free-standing, wall, and floor mounting options as well as a variety of custom housing features such as custom hole mounting for HMI operators, equipment, and hose entry. Customized features include:
- A wall.
- Floor or powder housing.
- A high-performance.
- Cost-effective and high-performance housing with a wide range of features.
In addition, IP55 standard enclosures ensure your equipment’s safety and dryness, and installation does not have to comply with the latest regulations. The air pressure in the enclosure is stabilized to prevent condensation that can damage your enclosure’s electrical components.
Vents and radiating fans provide a way for heat to escape and cool the housing’s electrical components. Put the lid on and use it as an insulating ventilation area for the entire housing, not just for the heat exchanger.